Yes.
But please be aware of some points as below:
-Usually these resin can work with opened hot nozzle and valved gate, but not hot tip.
-These resins are very easily got degraded if the molding machine stops for tooling repair, and the power of heater of hot runner are not turned off, more than 5 minutes will cause issue. The degraded resin will stick at the corners inside the hot runner system could not be removed, this will cause black defect spots on samples, especially light color parts.
-If the production volume is high, it’s better to order two or more sets of hot runner as spare component to take place of the current hot runner when degraded defect spot issue happens.
When the production volume is low, consider cold runner for PEEK, PPS, PPSU, LCP will be better.